Printronix T5000 User Manual page 158

Chapter 3
Emulation Submenus
Alt. Set 80-9F (Coax, Twinax, TN5250)
(From page 128, page 131, page 138.)
•
Printable. Prints data in the range of hex 80 through hex 9F.
•
Control Code. Interprets data in the range of hex 80 through hex 9F as a
control code.
The factory default is Printable.
Append Rotated
(From page 142.)
•
Disable. Logos and alphanumeric strings are treated as separate
elements.
•
Enable. Appends logos to an alphanumeric string rotated in a clockwise,
counterclockwise, or inverted orientation.
The factory default is Disable.
Auto FF at ^PN
(From page 143.) When enabled, a FF will be generated automatically to slew
to the end of form when the ^PN command is encountered, and when the
current vertical position is not at the top of form.
The options are Disable (the factory default) and Enable.
Auto LF (P-Series, P-Series XQ)
(From page 146, page 148.) This option defines the printer action when print
data is received past the forms width setting.
•
Disable. Discards any data past the forms width.
•
Enable. Performs an automatic carriage return and line feed when data is
received past the forms width.
The factory default is Disable.
Auto LF (Serial Matrix, Proprinter XL, Epson FX)
(From page 151, page 153, page 155.) This option defines the printer action
when print data is received past the forms width setting.
•
Enable. Performs an automatic carriage return and line feed when data is
received past the forms width.
•
Disable. Discards any data past the forms width.
The factory default is Enable.
158