Standard Chars; Bold Chars; Batch Counter - Printronix T5000 User Manual

For example, with a print head that prints at 203 dpi you would use the
following formula:
203 X 203 X 1 X 1
Therefore, select a value that is equal to or greater than 5,151. The closest
available value is 6 KBytes.
The allowable range is 1 KByte through 20 KBytes, in 1-KByte increments.
The factory default is 01 KBytes.
NOTE: For most applications, the default settings for font memory are
acceptable. Therefore, do not change the defaults unless your
application requires an uncommon memory configuration.

Standard Chars.

This menu entry permits the user to adjust the thickness or font weight of
standard text fonts.
The range is 0-512, and the factory default is 340.

Bold Chars.

This menu entry permits the user to adjust the thickness or font weight of bold
text fonts. This menu will not take effect unless it is saved in a configuration
and the printer is powered up with that configuration.
The range is 0-512, and the factory default is 448.
Extra Bold Char.
This menu entry permits the user to adjust the thickness or font weight of
extra bold text fonts.
The range is 0-512, and the factory default is 504.
NOTE: For most applications, the default settings for font memory are
acceptable. Therefore, do not change the defaults unless your
application requires an uncommon memory configuration.

Batch Counter

This is an Advanced User function for PGL only that allows the monitoring of
pages or forms left to be printed. The number of pages to be printed and the
number of pages printed already are displayed on the front control panel.
Batch Counter is activated by selecting Enable.
The options are Disable (the factory default) and Enable.
PRINTER CONTROL Submenus
= 5,151
8
123