Printer Select - Printronix T5000 User Manual

Print Char. Set
(From page 146, page 148, page 150, page 152, page 155.)
Selecting this menu item by pressing the ↵ key causes the printer to print the
currently selected character set.
Printer PI
(From page 144.)
•
Disable. The LP+ Emulation is configured with the PI line disabled.
•
Enable. The LP+ Emulation is configured with the PI line enabled.
The factory default is Disable.

Printer Select

(From page 151, page 155.)
•
Disable. Ignores the ASCII DC1 and DC3 control codes.
•
Enable. Disables the printer when a DC1 control code is received, and
enables the printer when a DC3 control code is received.
The factory default is Disable.
Prop Line Length
(From page 144.)
•
Enable. The position of the next graphic element will be determined by
the physical length of a text string (when using a proportional spaced
font).
•
Disable. The position of the next graphic element will be determined as if
the font was monospaced (all characters had the same specified width).
The factory default is Enable.
Prop. Spacing
(From page 145, page 148, page 150, page 152, page 154.)
Each printed character is contained inside a character cell. The width of the
character cell includes the character and the space around the character.
•
Enable. The width of each character cell varies with the width of the
character. For example, [i] takes less space to print than [m]. Using
proportional fonts generally increases the readability of printed
documents, giving text a typeset appearance.
•
Disable. Each character cell is printed with the same width. Each column
in the printed text will line up.
The factory default is Enable.
187