Define Lf Code (P-Series, P-Series Xq); Early Print Cmpl (Coax); Early Print Comp (Ipds) - Printronix T5000 User Manual

Chapter 3
Emulation Submenus
•
LF = CR + LF. Performs an automatic carriage return. The next print
position will be print position 1 of the next line.
The factory default is LF = LF.

Define LF code (P-Series, P-Series XQ)

(From page 146, page 148.)
•
LF = CR + LF. Forces an automatic carriage return with each line feed
command received. The next print position is position 1 of the next line.
•
LF = LF. Does not perform an automatic carriage return when a line feed
command is received. The next print position will be the current print
position on the next line.
The factory default is LF = CR + LF.
Do FF at TOF
(From page 141.) Determines whether the printer, with media already set at
the TOF (Top-of-form) position, will advance media to the next TOF position
upon receipt of a FF command.
•
Enable. The printer will advance media from the present TOF position to
the next TOF position upon receipt of a FF command, causing a blank
form.
•
Disable. The printer will not advance media from the present TOF
position to the next TOF position upon receipt of a FF command.
The factory default is Enable.

Early Print Cmpl (Coax)

(From page 128.) Early Print Complete capability allows the printer to send
print (order) complete status to the host before the printer is actually done
printing all data. This option is valid only when the printer is in DSC/DSE
mode.
•
Disable. The printer will suppress the Early Print Complete response until
all printing is complete.
•
Enable. The printer will send an acknowledgement to the host when it is
able to accept more data.
NOTE: When an Early Print Complete is enabled and an error occurs, there
The factory default is Disable.

Early Print Comp (IPDS)

(From page 136.) This parameter chooses when to send a Print Complete to
the Controller.
•
Off. Print Complete is sent if page is printed completely.
170
may be data loss experienced.