Max Pi; Max. Print Width - Printronix T5000 User Manual

LPI
(From page 142.) This menu item selects the number of lines printed per inch.
The range is 6-10, and the factory default is 6.

Max PI 16

(From page 144.)
•
Enable. A paper slew of 0-15 will move 1-16 lines.
•
Disable. A paper slew of 1-15 will move 1-15 lines. A paper slew of 0 will
always move 1 line.
The factory default is Enable.

Max. Print Width

(From page 129, page 131, page 138.) Set the maximum print width the
printer will print when using a C/T host interface. Set for 13.2 inches when
printing files larger than the width of the printer. All data exceeding the width
of the maximum Printer Width will be truncated.
•
13.2 inches
•
Printer Width (the maximum width of the printer)
The factory default is 13.2 inches.
Midline PY (includes ^PN)
(From page 143.)
•
Disable. The Graphics mode Enabled command, ^PY, must be the first
three characters of a line.
•
Enable. The ^PY or ^PN can occur anywhere in a line.
The factory default is Disable.
NL at MPP+1
(From page 128, page 134.) Specifies the linespacing action when the
printline exceeds the rightmost print position and text continues from the
leftmost print position on a new line.
•
On. Moves to the first print position two lines down from the current
position.
•
Off. Moves to the first print position of the next print line.
The factory default is On.
Null Handling
(From page 134.) This item allows the printer to either treat nulls as blank
spaces or ignore them. If nulls are ignored, the print position does not move.
•
Space. Treats nulls as spaces.
183