Barcode Options; Power On Igp/Pgl; Ext Execute Copy - Printronix P7010 User Manual

Chapter 4
IGP/PGL Emulation

Power On IGP/PGL

You can set the IGP feature so that it is enabled or disabled when the printer
is powered on.
•
Enable (default). The PGL is enabled when the printer is powered on.
(The PGL feature is initialized in the Normal mode.)
•
Disable. The PGL is disabled when the printer is powered on. (The PGL
feature is initialized to the Quiet mode.)

Ext Execute Copy

•
Disable (default). Dynamic data and overlay data are not allowed if the
optional Form Count parameter (number of forms to print) is specified as
part of the Execute command. (This setting is IGP-100 compatible.)
•
Enable. Only dynamic data is allowed within a form in which the Form
Count parameter is specified in the Execute command. In this case, the
exact same form (with identical dynamic data, etc.) is printed for the Form
Count. However, incremental data is not incremented since the page that
is printing is exactly the same. Also, each form is printed on a separate
page.
Barcode
Options
(from page 177)
UPC Optimized
Descenders Ratio
Always* Disable*
Never Enable
Only with PDF

Barcode Options

The following sub-options help define specific options regarding barcode
printing.
UPC Descenders
This parameter allows you to print barcode descenders when human
readable data is not present in the UPC/EAN barcodes.
•
Always (default). UPC/EAN barcodes are printed with descenders, even
if there is no human readable data.
•
Never. UPC/EAN barcodes are printed without descenders if there is no
human readable data.
•
Only with PDF. UPC/EAN barcodes are printed with descenders only
when the PDF command is present.
182
I-2/5 AI 00
Selection Spaces
Leading Zero* Disable*
Trailing Space Enable
X2 DPD
Modulo 7 CD
* = Factory Default
User-Def
Select SO
Ratio
Char
Enable*
14*
Disable
(0-255)
C39
Compatbl.
Disable*
Enable