Lock / Unlock The Remote Control Panel; Pre-Setting Set Point With Remote Control Panel - Carrier VECTOR 6500 Operation & Service Manual

c.Lock / Unlock the Remote Control Panel
d. Pre-setting Set Point With Remote Control Panel
The control panel allows the user to pre-set 5 different temperatures.
Once preset set points have been chosen, only those 5 designated set points can be used.
1. Place the unit switch panel mounted Main
Power switch in the desired position.
2. Press Carrier logo and the lock light will illuminate.
62-11389
LOCKING THE PANEL:
Press and hold the Carrier Logo for
approximately one second and then
release.
The lock indicator light will illuminate.
UNLOCKING THE PANEL:
Press the Carrier Logo for 10 seconds
The lock indicator light will de-energize.
CARRIER LOGO
LOCK INDICATOR LIGHT
NOTE
3. Press UP ARROW for 10 sec-
onds. P1 will be displayed.
4. Set lowest set point required.
5. Press Carrier logo and P2 will
be displayed. Set next highest
temperature required.
6. Follow same procedure for the
next three temperatures.
3−34