View Hour Meters - Carrier VECTOR 6500 Operation & Service Manual

3.14 VIEW HOUR METERS

HEAT COOL
-20.0
SETPOINT
TOTAL ENGINE HOURS: 0 HRS
2.
3. Displayed hour meters will depend on microprocessor configurations (refer to Table 5−2). Typical
displayed meters are: "TOTAL ENGINE HOURS", "STANDBY RUN HOURS" and "TOTAL SWITCH
ON HOURS".
4. Pressing the = key will access all other meters and display "OTHER
METERS AND COUNTERS".
5. The selected hour meter will remain in the MessageCenter for 10 seconds, then the
default message ("STATUS OK" or other customer specified message) will display.
6. To lock an hour meter in the MessageCenter for continuous viewing, press the = key.
The Data item will flash continuously to indicate it is locked.
7. Pressing any key on the keypad will unlock the item. Pressing the UP or
DOWN ARROW key will move to the next hour meter.
Hour meters available when "OTHER METERS AND COUNTERS" is chosen are:
SMeters listed in Step 3 above and, up to 5 User
Configurable meters including:
S Switch On Standby Hours
S Engine Protect Hours.
S Switch On Protect Hours.
62-11389
DEFROST ALARM
+34.5 F
BOX TEMPERATURE
MANUAL
ALARM LIST
DEFROST
Press the green UP ARROW key. The MessageCenter will display "PRESS ↑↓ TO
SCROLL, THEN = TO LOCK" . Continue to press the green UP ARROW key to move
down the hour meter list, or press the DOWN ARROW key to move up the list.
START‐STOP CONTINUOUS
SELECT
START‐STOP/
CONTINUOUS
1. Press the SELECT key until the MessageCenter dis-
plays "PRESS ↑↓ TO VIEW HOURMETERS".
S Engine Sleep Hours.
S Switch On Sleep Hours.
S Compressor Run Hours
S High Speed Hours.
S Start cycles.
3−20