Idle Session Timeout; System Log - Cisco SX350 Series Administration Manual

Managed switches
Hide thumbs Also See for SX350 Series:
Table of Contents

Advertisement

5

Idle Session Timeout

STEP 1
STEP 2
STEP 3
Time Settings

System Log

67
The Idle Session Timeout configures the time intervals that the management sessions can
remain idle before they timeout and you must log in again to reestablish one of the following
sessions:
HTTP Session Timeout
HTTPS Session Timeout
Console Session Timeout
Telnet Session Timeout
SSH Session Timeout
To set the idle session timeout for various types of sessions:
Click Administration > Idle Session Timeout.
Select the timeout for the each type of session from the corresponding list. The default timeout
value is 10 minutes.
Click Apply to set the configuration settings on the device.
See
Administration: Time
This section describes the system logging, which enables the device to generate multiple
independent logs. Each log is a set of messages describing system events.
The device generates the following local logs:
Log sent to the console interface.
Log written into a cyclical list of logged events in the RAM and erased when the
device reboots.
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
Settings.
Administration
Idle Session Timeout

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents