Removing The Cleaning Tape Cartridge; Loading Cleaning Tape In The Cartridge - DataCard ImageCard IV User Manual

4-6

Removing the cleaning tape cartridge

Remove the cleaning tape cartridge when a "Cleaning tape empty" message appears
or when setting up the printer.
Remove the cleaning tape cartridge
1
2
3

Loading cleaning tape in the cartridge

Remove the used cleaning tape and load new tape after removing the cleaning tape
cartridge from the printer.
Push down on the corner of the printer's top cover to unlatch it. Lift the top cover
to the fully upright position.
!
When the top cover opens, the interlock switch removes power from all
motors and fans. If overlay or topcoat stations are installed, power is removed
from the heaters. Overlay or topcoat stations remain HOT.
Pull up on the lock button to release the cleaning tape cartridge (step 1 in
Figure 4-5).
E
On some cartridges, turn the lock counterclockwise
cleaning tape cartridge.
iciv062u
Figure 4-5: Remove the cleaning tape cartridge
Pull firmly and lift the cleaning tape cartridge straight up until the cartridge is
above the edge of the printer (step 2 in
printer.
to release the
2
1
Figure 4-5). Remove the cartridge from the
♦
User's Guide for the ImageCard® IV Printer
Loading supplies