Table of Contents
Advertisement
Maintaining the printer
•
•
Cleaning the outside of the printer
The outside of the printer should be kept clean for best appearance and to prevent air
intake and exhaust fans from moving debris inside the printer or becoming obstructed.
The frequency of cleaning depends on the environment in which the printer operates.
If the printer is used in a clean environment, clean the outside of the printer at least
once a month. If the printer is used in a dusty or otherwise dirty environment, clean the
printer daily or weekly.
Tools to use:
•
•
Clean the outside of the printer
1
2
3
4
5
Cleaning the inside of the printer
The inside of the printer should be kept clean to ensure card quality and continued
smooth operation of the printer.
The frequency of cleaning depends on the supplies used and the environment in
which the printer operates. Typically, clean the printer weekly or after every 5,000
cards. Clean the printer more often if:
•
•
User's Guide for the ImageCard® IV Printer
Cleaning the card input and output trays and cavities
Using the cleaning card
Vacuum cleaner with attachments
Clean, lint-free cloth and mild detergent (As an alternative, isopropanol can be
used with the lint-free cloth.)
Make sure the power for the printer is off and the printer top cover is closed.
Remove the power cord from the power receptacle.
Use the vacuum cleaner to clean around the printer.
–
Clean behind the printer. If any dust is visible on the back panel of the printer
or on the fan opening, vacuum it from the printer.
–
Clean around the base of the printer. Pay special attention to the left side of
the printer, where air intake vents are located. These vents should be kept
free of dust or obstructions.
Use a lint-free cloth and mild detergent to clean the outside of the printer.
Continue with other cleaning tasks.
The printer is used in a dusty or otherwise dirty environment
A topcoat station is installed and you regularly use topcoat on cards
♦
7-5
Advertisement
Table of Contents
Troubleshooting
