DataCard ImageCard IV User Manual page 157

DuraGard
Smart Card
1.0 mil Clear
Laminate
DuraGard
0.5 mil Clear
Laminate
DuraGard
Smart Card
0.5 mil Clear
Laminate
i
i
Custom material, including custom holograms, are available on topcoat or laminate
material. Contact your Datacard representative for more information.
User's Guide for the ImageCard® IV Printer
Name Part number
553277-102
557171-001
557171-002
Datacard recommends that laminate patches not be applied over magnetic stripes
or signature panels. Laminate can be applied over topcoat applied in the topcoat
station.
Full-card laminate can be applied to contactless (RF) smart cards.
Genuine
ICIV082U
Figure B-1: "Genuine Authentic" holographic laminate or topcoat
Heater roller
Metal only Die-cut polyester patches, 1 mil
thick, on a carrier material. Patch
covers all of the card except the
area of the smart card chip.
About 250 uses.
Either Full-card die-cut polyester
patches, 0.5 mil thick, on a
carrier material.
About 300 uses.
Either Die-cut polyester patches, 0.5
mil thick, on a carrier material.
Patch covers all of card except
the area of the smart card chip.
About 300 uses.
Authentic
B-5
Description