Setting A Smart Card Port For Windows - DataCard ImageCard IV User Manual

11 Choose OK or Close on each window to select the choice and close the window. If
12 Choose OK to close the System dialog box and make the changes take effect.
Setting a smart card port for Windows Me & 98
For some smart card applications, you connect the PC to the serial port on the
ImageCard IV printer. The PC should be set to match the printer serial port settings.
This section describes how to set the PC serial port in the Windows 98 and Windows
Me operating systems.
These settings apply to serial ports for both contact and contactless smart card
modules. If you use a contact station with the printer, see the information about the
contact station for port settings.
Set the serial port on Windows Me & 98
1
2
3
4
5
User's Guide for the ImageCard® IV Printer
the Version Conflict dialog box appears, choose Yes to keep the existing version.
From the Start menu, choose Settings and then Control Panel.
From the control panel, choose System.
On the system Properties dialog box, choose the Device Manager tab.
Figure C-5: Device Manager tab of System Properties dialog box
Click the Plus sign + next to Ports (COM & LPT) to display a list of ports.
From the Ports list, choose the port, such as COM1 or COM2.
♦
C-9