Panel Lights - DataCard ImageCard IV User Manual

Using the printer
2
3
Clear cards from the printer
1
2

Panel lights

The front panel has two lights that provide information about the printer's current state.
The upper light is the power light and the lower light is the status light.
Power light
Blinking green
Steady green
Blinking green
User's Guide for the ImageCard® IV Printer
When the printer has been paused, press the Ready button to resume operation.
If there are no problems in the printer, the printer finishes cards in the printer and
moves them to the output tray.
To clear the cards currently in the printer, press and hold the Ready button until a
tone sounds.
If there is no error, the printer moves partly processed cards to the reject bin and
removes card data from the printer memory.
If a message box is displayed on the PC, fix the situation described by the
message first. See "Responding to messages" on page
The printer returns to the previous state, such as busy printing cards, or paused
due to an error.
Description
The printer is starting.
The printer power is on.
The optional heated roller in the topcoat or overlay
station is warming up.
♦
♦
Power light
Status light
Figure 5-2: Panel lights
5-3
5-14.