Replacing The Cleaning Tape Cartridge - DataCard ImageCard IV User Manual

4-8
12 Press down on the take-up spool and turn slightly (if needed) until the spool fully
13 Pick up the cleaning tape cartridge and turn it over.
14 Turn the take-up knob to remove any slack in the cleaning tape. The cleaning tape

Replacing the cleaning tape cartridge

When replacing the cleaning tape cartridge, begin with the top cover open.
Replace the cleaning tape cartridge
1
2
Glide roller
2
Full supply roll
Figure 4-6: Load cleaning tape in the cartridge
covers the spool holder ribs (step 4 in
E
Make sure the material winds clockwise
cartridge is ready to be replaced in the printer.
Hold the loaded cleaning tape cartridge over the cleaning station.
Align the cleaning tape cartridge so the cleaning tape spools fit over the cleaning
tape spindles and the glide roller is over its shaft (step 1 in
4
Empty take-up spool
3
1
iciv180u
Figure 4-6).
.
♦
Figure
User's Guide for the ImageCard® IV Printer
Loading supplies
4-7).