Setting A Smart Card Serial Port-Windows 2000, Xp, And Nt - DataCard ImageCard IV User Manual

16 Click OK on the Printer Port (LPT1) Properties dialog box and on the System
Setting a smart card serial port—Windows 2000, XP, and NT
For some smart card applications, you connect the PC to the printer's smart card
serial port. The PC should be set to match the printer's smart card serial port settings.
This section describes how to set the PC serial port in the Windows 2000, Windows
XP, or Windows NT 4.0 operating systems.
These settings apply to serial ports for both contact and contactless smart card
modules. If you use a contact station with the printer, see the information about the
contact station for port settings.
Set the serial port on Windows 2000 and NT
1
2
3
User's Guide for the ImageCard® IV Printer
Properties dialog box to save settings and close the dialog boxes.
From the Control Panel, choose Ports.
From the Ports dialog box, choose the port, such as COM1 or COM2.
Figure C-2: Ports dialog box
Choose the Settings button to display the port settings.
i
If the PC has more than one serial port, make sure you view the settings for
the serial port to which the smart card module is attached.
♦
C-5