DataCard ImageCard IV User Manual page 36

3-12
•
•
•
Find the section that applies to the type of port and operating system on the PC:
•
•
Install the printer driver to a parallel port on Windows XP/2000
1
2
3
4
5
6
Several other connection methods are available, including printer sharing over a
network, and installing two printers on parallel ports on a PC. See the e-Guide for
ImageCard IV Printers for information on these installation alternatives.
You can also directly connect the printer to a network using a print server. See the
SmartDriver Direct Network Guide for more information.
See the e-Guide for ImageCard IV Printers for information on printer pooling on
the Windows 2000 and XP operating systems.
Parallel port and Windows 2000 or XP all operating system
– "Install the printer driver to a parallel port on Windows XP/2000" on page 3-12
Parallel port and Windows ME, 98 or NT operating system
– "Install the printer driver to a parallel port on Windows ME, 98 or NT" on
page 3-14
Close all applications. Do not close Windows.
Log in as the Administrator when you install the printer driver.
Make sure the printer is powered on and ready.
Make sure the printer is connected to the PC.
Insert the CD-ROM in the PC's drive.
If the operating system detects the printer and displays the Found/Detected New
Hardware Wizard, go to step 12.
Figure 3-12: Datacard Group program
Setting up the printer
User's Guide for the ImageCard® IV Printer