DataCard ImageCard IV User Manual page 63

Loading supplies
2
3
4
5
6
7
User's Guide for the ImageCard® IV Printer
i
If you have more than one optional station, make sure you match the cartridge
with the station.
Align the topcoat cartridge so the spools in the cartridge are over the spindles in
the station.
3
Figure 4-13: Replace the topcoat cartridge
Lower the topcoat cartridge into the printer (step 1 in
Press down firmly to seat the topcoat cartridge in the printer.
E
If the cartridge becomes stuck part of the way into the station, turn the supply
and take-up knobs clockwise
spool ribs.
Press the lock to secure the topcoat cartridge in the printer (step 2 in
Move the supply tracker toward the full supply roll until it rests on the supply roll
(step 3 in Figure 4-13).
Close the cover of the printer and press to latch it. If the printer has a lock, lock the
printer.
1
2
1
iciv148u
Figure
slightly so the spindle ribs fit between the
♦
4-17
4-13).
Figure 4-13).