Table of Contents
Advertisement
8-6
Check the following:
•
•
See"Magnetic stripe encoding" on page D-1
stripe tracks.
•
•
•
•
Red
Green
Dark Blue
Black
Figure 8-4: ImageCard printer test card (using color ribbon)
E
Your service provider might ask you to use a different procedure to make a
printer test card. The card printed might have additional areas printed on it.
For UltraGrafix printers, the test card is printed with one color, such as black.
The test card has the pattern shown on the front of the card. The back of the card
will be printed with a similar pattern if the printer includes a duplex module.
If a magnetic stripe module is installed in the printer and enabled, the following
data is encoded on the card:
Track
Format
Track 1
(IATA)
Track 2
(ABA)
Track 3
(TTS)
Track 3
(NTT)
The tracks available depend on the type of module installed.
The magnetic stripe data on the printer test card is generated by the printer and
does not test driver-to-printer communication.
If a topcoat station is installed in the printer, topcoat is applied to the front of the
card.
If an overlay station is installed in the printer, an overlay patch is applied to the
front of the card.
Black Border
Data
TEST PATTERN IATA CHARACTER
SUBSET 0123456789
012345678012345678990123456789
0123456789=9876543210
0123456789=9876543210
for more information about magnetic
User's Guide for the ImageCard® IV Printer
Troubleshooting
Blue Cyan
Magenta
Yellow
Black
Advertisement
Table of Contents
Troubleshooting
