DataCard ImageCard IV User Manual page 184

C-10
6
7
8
9
Choose the Properties button to display the port settings.
i
If the PC has more than one serial port, make sure you view the settings for
the serial port to which the smart card module is attached.
Figure C-6: Settings dialog box
Choose the Port Settings tab.
Choose the following settings:
Setting Value
Bits per second 9600
Data bits 8
Parity None
Stop bits 1
Flow control None
When the settings are correct, click OK to save settings and close the dialog box.
♦
User's Guide for the ImageCard® IV Printer