DataCard ImageCard IV User Manual page 148

8-26
16 Place the rear shipping cushion in the box, covering the back of the printer, when
17 Close the cardboard flap at the opening to the shipping carton (step 5 in
18 Close the outside flaps on the shipping carton (step 6 in
19 Secure the carton with shipping tape. Be sure to wrap around the shipping carton
20 Put a shipping label on the carton. If you are returning the printer for service, use
21 Ship the carton. If you are returning the printer for service, follow the instructions
the printer is completely in the carton (step 4 in
Figure 8-8).
several times to secure it.
the address provided by service.
provided by service to ship the carton to a service center.
Figure 8-8).
Figure
♦
User's Guide for the ImageCard® IV Printer
Troubleshooting
8-8).