DataCard ImageCard IV User Manual page 40

Imagecard series
Hide thumbs Also See for ImageCard IV:
Table of Contents

Advertisement

3-16
8
9
10 Use the default name for the printer or enter a name of your choice. Click Next.
11 Select the port to which the printer is connected and click Next.
12 Select whether this printer should be the default printer.
13 Click Next to copy the files to the PC and update entries to enable the printer.
14 The installation program detects whether the Adobe Acrobat Reader program is
15 Follow the prompts to install Acrobat Reader.
16 The Restart Windows dialog box appears after a moment.
17 Click Finish to close the installation. The installation program will restart Windows
18 Driver installation is complete. Go to
E
If you used a different sequence to start installation, you might have a slightly
different sequence of prompts.
The installation program displays a question asking whether you would like to
view the Release Notes. Do one of the following:
Click Next to continue.
Click Yes and then Next to open the Release Notes in WordPad. Close the
Release Notes when you have viewed the information.
Choose the e-Guides to install. You can choose the Magna e-Guide, the Select
e-Guide, ImageCard IV e-Guide, or the SP35 e-Guide. Install the ImageCard IV e-
Guide. (You can install additional e-Guides if you are likely to use more than one
type of printer with this PC.) Click Next to install the e-Guide(s) you selected.
E
Select only one port for printer connection.
E
The small page size for cards might cause unexpected results with some
applications if the ImageCard IV printer is the default.
installed on the PC. If it is not, the installation program asks if you want to install
Acrobat Reader. If you see this prompt, make sure Yes is chosen and then click
Next to install it.
when you click Finish.
page
3-17, and then print a sample card to verify installation. See
cards" on page
3-18.
E
On Windows Me and 98, the Add New Hardware Wizard can appear when
you restart Windows. Windows will associate the printer and driver, and close
the Add New Hardware Wizard automatically.
"Changing required printer settings" on
User's Guide for the ImageCard® IV Printer
Setting up the printer
"Printing sample

Advertisement

Table of Contents
loading

Table of Contents