DataCard ImageCard IV User Manual page 116

7-16
3
4
5
6
i
7
Push down on the corner of the printer's top cover to unlatch it. Lift the top cover
to the fully upright position.
Remove the print ribbon cartridge. See
page 4-2.
Put on the ESD strap. Follow the instructions with the strap.
Push the locking tabs to the side (step 1 in
cable from the printhead board (step 2 in
iciv178u
Figure 7-13: Remove the printhead cable from the board
Move the cable away from the printhead to avoid pinching the printhead cable
wires.
Press the printhead cage stop (step 1 in
back (step 2 in Figure 7-14).
"Removing the print ribbon cartridge" on
Figure 7-13). Remove the printhead
Figure 7-13).
1
1
2
2
Figure 7-14) and move the printhead
User's Guide for the ImageCard® IV Printer
Maintaining the printer