Saddle Gear Phase Adjustment - Konica Minolta Bizhub C350 Service Manual

Other
[6]
[10]
[11]
[12]
1.3.12

Saddle Gear Phase Adjustment

[1]
bizhub C350 Field Service Ver.1.0 Mar. 2004
5. Turn the Folding Jam Release Dial
[7]
4583fs2518c0
6. Remove the C-clip [8], and remove
[8]
7. Unplug two connectors [10].
[9]
4583fs2519c0
8. Remove the Stapler[11].
☞ 2-6
[12]
9. Remove three screws [12], and pull
[13]
4583fs2520c0
[2] • Whenever the Gear in front of the Sad-
[1]
1. Remove the Saddle.
☞ 2-9
2. Remove five screws [1], and
4583fs2545c0
3. Set the Folding Roller [3] and Saddle
[4]
4. With the Folding Roller and the Sad-
[3]
4583fs2515c0
2-10
[6] to move the Paper Pressure [7]
inside.
the Timing Belt [9].
out and remove the Saddle [13].
dle or the Folding Roller has been
replaced or removed for some reason,
make gear phase adjustment following
the procedures given below.
remove the Saddle Gear Cover [2].
Cam [4] within the Saddle as shown
in the figure.
dle Cam positioned as shown in the
Left figure, set the gears as shown in
the figure in the following way.