Middle Transport Unit; Stapler - Konica Minolta Bizhub C350 Service Manual

Other
1.3.8

Middle Transport Unit

[2]
[1]
[7]
[6]
1.3.9

Stapler

[1]
[2]
[5]
[4]
bizhub C350 Field Service Ver.1.0 Mar. 2004
1. Remove four screws [1].
[3]
2. Hold up the Middle Front Cover [2]
[1]
4583fs2540c0
3. Unplug two connectors [4].
4. Pinch the tie band [5], and remove it
[5]
[4]
4583fs2541c0
5. Remove two screws [6].
6. Loosen two screws [7].
7. Remove the Middle Transport Unit by
[7]
4583fs2542c0
1. Open the Front Door [1].
2. Pull out the Stapler [3] while pressing
[3]
4583fs2502c0
NOTES
• Do not remove the Stapler from the
4583fs2503c0
2-6
and the Middle Rear Cover [3], and
remove them while shifting them
back and forth.
from the sheet metal.
sliding it upwards.
the Stop Lever [2].
shaft of the stapler frame, or dis-
placement will be caused between
the position to which the Staple
Driver [4] (the lower unit of the Sta-
pler) feeds staples and the position
from which the Staple Clincher [5]
(the upper unit of the Stapler)
receives them.