Konica Minolta Bizhub C350 Service Manual page 105

bizhub C350 Field Service Ver.2.0 April 2004
[4]
[7]
[6]
[5]
[4]
[4]
4036fs2523c0
4036fs2524c0
[1] [3]
[2]
4036fs2525c0
2-67
4. Remove three screws [4] and the
Scanner Motor Assy [5].
5. Remove two screws [6] and the
Scanner Motor [7].
B. Reinstallation Procedure
1. Temporarily secure the Scanner
Motor Assy [2] using three screws
[1].
2. Hook the spring [3].
3. With the Scanner drive gear set
screw located on the right-hand side
as shown on the left, slide the Scan-
ner Motor Assy to the left and check
that it is returned to the original posi-
tion by the tension of the spring. Per-
form this step three times.
4. Securely tighten the three screws to
fix the Scanner Motor Assy [2] into
position.
Other