Lph - Konica Minolta Bizhub C350 Service Manual

Other
[6]
[8]
[12]
[11]
4.3.48

LPH

[1]
[2]
bizhub C350 Field Service Ver. 2.0 April 2004
6. Open the Right Door.
7. Remove four screws [6] and the Syn-
[7]
chronizing Roller entrance guide [7].
[6]
4036fs2139c0
8. Remove three Screws [8] and Con-
nector [9], and remove the AIDC/
[10]
Registration Sensor/1 [10].
[9]
4036fs2140c0
9. Remove two Screws [11] and Con-
nector [12], and remove the AIDC/
Registration Sensor/2 [13].
[13]
4036fs2141c0
A. Removal Procedure
1. Remove the LPH Unit.
☞ 2-64
2. Holding the LPH Assy [1] with hands,
unlock [2] it.
NOTES
• Do not touch the LED by hand.
Clean the LED, if touched by hand,
using the LED cleaning jig.
• Be careful about the spring that can
spring off when the LPH Assy is
unlocked.
• If the LPH Assy comes off position
when the Lock is unlocked, the LPH
Assy must be installed using the
LPH Assy mounting jig.
4036fs2627c0
2-90