Konica Minolta Bizhub C350 Service Manual page 131

bizhub C350 Field Service Ver.2.0 April 2004
<LPH C/Bk>
[9]
<LPH Y/M>
[9]
[11]
[10]
[12]
[13]
5. Align the markings [9] on the flat
6. Install the Guide.
[9]
NOTE
• Make sure that no part of the flat
cable is wedged in mechanisms or
bent.
4036fs2634c0
7. Secure the LPH [10] using three
4036fs2632c0
8. Push the slack portion in the flat
[12]
4036fs2635c0
9. Install the two screws [13] to secure
[14]
[13]
10. Connect the connector [15].
NOTE
• Make sure that no part of the flat
cable is wedged in mechanisms or
bent.
[15]
• Make sure that the flat cable is
4036fs2543c0
aligned with the groove in the
Guide Assy.
2-93
cable with the positions shown in the
photo.
screws [11].
cable [12] into the inside of the
machine.
the guide Assy [14].
Other