bizhub C350 Field Service Ver. 2.0 April 2004
[1]
4. After the Bypass Paper Size Unit base has been mounted, check that the lever of the
Bypass Paper Size Unit moves smoothly in a manner operatively connected to the
Bypass Guide.
5. Call the Tech. Rep. Mode to the screen and select "Machine Adjust" → "Bypass Guide
Adjust." Then, carry out "Bypass Guide Adjust."
☞
3-60
2. Install the Bypass Unit Cover so that
part A (edge) [2] of the Rack Gear [1]
for the Bypass Paper Size Unit and
part B [3] of the Bypass Unit Cover
are aligned in a straight line.
[3]
[2]
4036fs3051c0
3. When the Bypass Paper Size Unit
base is mounted, align the lever
position of the Bypass Paper Size
Unit with the tab at the center in a
straight line.
4036fs3052c0
3-103
Mechanical adjustment