Scanner Motor - Konica Minolta Bizhub C350 Service Manual

Other
4.3.30

Scanner Motor

A. Removal Procedure
1. Remove the Rear Cover and IR Upper Rear Cover.
☞ 2-42
2. Remove 16 screws [1] and the reinforcement frame [2].
[1]
bizhub C350 Field Service Ver. 2.0 April 2004
NOTES
• After replacing the LPH Unit, be
[12]
sure to turn four Drive Hubs [12] to
release locking. Proceeding with
job while still being locked may
unintentionally release the locking
condition, thus damaging the Drive
hub.
4036fs2601c1
• For installation of the LPH Unit,
lock four Drive hubs again before
installation.
• When the LPH Unit has been rein-
stalled, be sure to run "Stabilizer"
available from "Image Adjust" of
the Tech. Rep. mode.
[1]
[1]
[1]
[1]
3. Remove the tension spring [3] for the
[3]
Scanner Motor timing belt.
4036fs2091c0
2-66
[2]
[1]
[1]
4036fs2090c1