Folding Position Section Misfeed; Stapler Section Misfeed - Konica Minolta Bizhub C350 Service Manual

Jam Display
1.4.3

Folding position section misfeed

A. Detection timing
Type
The Folding Position Sensor (PI10-FN) does not detect paper even after the set
period of time after the paper has been fed from the Transport Booklet Tray to the
Folding position
stapling position during stapling operation.
section misfeed
Paper is not removed from the Folding Position Sensor (PI10-FN) even after the
detection
lapse of approx. 10.5 sec. after the Staple/Folding Motor (M7-FN) has been driven
during stapling operation.
B. Action
Folding Position Sensor (PI10-FN)
Step
1 Initial check items
2 PI10-FN I/O, sensor check
3 PWB-A FN replacement
1.4.4

Stapler section misfeed

A. Detection timing
Type
The Staple Drive Home Position Sensor (PI19-FN) is not turned OFF or does not
Stapler section mis-
return to its home position even after the set period of time after the stapler has
feed detection
been driven.
B. Action
Staple Drive Home Position Sensor (PI19-FN)
Step
1 Initial check items
2 PI19-FN I/O, sensor check
3 PWB-A FN replacement
Relevant electrical parts
Action
Relevant electrical parts
Action
4-4
bizhub C350 Field Service Ver.1.0 Mar. 2004
Description
Finisher Control Board (PWB-A FN)
WIRING DIAGRAM
Control signal
-
PWB-A FN CN16 FN-2
-
Description
Finisher Control Board (PWB-A FN)
WIRING DIAGRAM
Control signal
-
-
-
Location
(Electrical compo-
nents)
-
F-3
E-6
Location
(Electrical compo-
nents)
-
-
E-6