Konica Minolta Bizhub C350 Service Manual page 153

bizhub C350 Field Service Ver. 2.0 April 2004
B. 2/4
(1) Unauthorized Access Lock
Functions • To select whether to enable or disable the unauthorized access lock function
• If a wrong authentication number (Administrator Code or access #) is entered
three times cumulatively (three consecutive times for the access # for Volume
Track and print lock unlocking) with this function enabled, the machine deter-
mines that it is an illegal access, nullifying the entry.
• Perform the following steps to cancel the nullified state of entry of the authentica-
tion number.
Nullified state of the Administrator Code: Turn OFF and ON the Power Switch.
Nullified state of the number other than the Administrator Code:
Turn OFF and ON the Power Switch or select Access Lock Release as set by the
administrator.
Use • To enable the unauthorized access lock function when an illegal access is
attempted
Setting/Procedure • The default setting is Disable.
(2) Access Lock Release
Functions • To cancel the Unauthorized Access Lock state
Use • To cancel the unauthorized access lock state when Unauthorized Access Lock
has been activated
Setting/Procedure • Lock Job: Cancel the access lock for locked jobs.
• Volume Track (E. K. C.): Cancel the access lock for Volume Track.
• HDD: Cancel the access lock for HDD.
(3) User Authentication
Functions • To select whether or not to use user authentication when the Scanner mode or
Box mode is being used
• If user authentication is to be used, the type of authentication is selected:
Active Directory or NTLM
Use • To use user authentication when the Scanner mode or Box mode is being used
Setting/Procedure • The default setting is No.
If authentication was set to be performed with Active Directory or NTLM, input the
domain name.
(4) LDAP Search
Functions • To select whether or not to use the LDAP Search function
LDAP Search: Performs search with the LDAP server based on the keyword
entered
Use • To prohibit the LDAP Search in the Scanner mode or Box mode.
Setting/Procedure • The default setting is Prohibit.
Enable Disable
No Active Directory
Permit Prohibit
3-17
Utility Mode
NTLM