Upper Cover; Side Guide - Konica Minolta Bizhub C350 Service Manual

bizhub C350 Field Service Ver.1.0 Mar. 2004
1.3.6

Upper Cover

[1]
[2]
[3]
1.3.7

Side Guide

[3]
[2]
[3]
[5]
[5]
[5]
1. Remove the Front Cover.
☞ 2-3
2. Remove the Rear Cover.
☞ 2-3
3. Remove two screws [1].
4. Open the Upper Door[2],and remove
4583fs2535c0
[1]
4583fs2536c0
1. Remove the Exit Tray.
☞ 2-3
[3]
2. Remove the Front Cover.
[1]
☞ 2-3
3. Remove the Rear Cover.
☞ 2-3
[3]
4. Derail the Exit Tray Support Plate
4583fs2537c0
5. Remove four screws [3].
6. Pull down the Side Guide [4] lightly,
[4]
4583fs2538c0
NOTES
• In reassembling, ensure of exact
[6]
[6]
• After reassembly, press each of
4583fs2539c0
2-5
the Upper Cover [3].
(Front) [1] and the Exit Tray Support
Plate (Rear) [2] to the outside off the
respective rail grooves.
disengage the Exit Tray Home Posi-
tion Detecting Lever (Rear) [5], and
then remove the Side Guide [4].
installation with the Exit Tray Home
Position Detecting Lever (Rear) [5]
set in the slot of the Exit Tray Home
Position Detecting Lever (Center)
[6].
these levers for several times to
make sure of exact installation.
Other