Candidate Rps - Supermicro SSE-X3348T/R User Manual

1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User's Manual

Candidate RPs

Clicking the C
ANDIDATE
(Figure 5-151). The parameters for this page are shown in
Table 5-128. Candidate RP Configuration Page Parameters
Parameter
Component ID
Group Address
Group Mask
RP Address
Figure 5-151. Candidate RP Configuration Page
RP tab brings up the C
S
Description
This parameter specifies a number uniquely identifying the component.
This parameter represents the multicast group, for which the switch advertises
itself as the candidate RP.
This parameter specifies the subnet mask, which when combined with the group
address gives the group prefix.
This parameter represents the IP address of the Candidate-RP.
RP C
ANDIDATE
5-178
page
ONFIGURATION
Table 5-128.