Login - Supermicro SSE-X3348T/R User Manual

1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User's Manual
The default management IP address for Supermicro Switch products is
192.168.100.102. This default IP address can be changed in the S
in the System Management section.
For the SSE-G48-TG4 and SSE-G24-TG4 switches you can connect to any of the front
panel 1G ports or back panel 10G ports to manage the switch with the default
management IP. These switches will create VLAN 1 by default with this IP address,
including all 1G and 10G ports.
For the SSE-X24S/R, SSE-X3348S/R or SSE-X3348T/R switches you can connect to
the 1G Ethernet RJ45 port, or the serial console port (on the front of the unit) to manage
the switch.
5-2

Login

The initial login page
management utility for 10 Gb/s switches. To login, enter your User Name and
Password in the fields provided and press the L
This User Name and Password are both used for accessing the switch through the web
for switch configuration. The entered user name and password are validated at the
switch end.
After logging in, you will be taken to the H
further details.
Figure 5-1. Login Page
(Figure 5-1) is used to login to the Supermicro Switch web-based
5-2
button.
OGIN
page of the utility. See
OME
S page
YSTEM ETTINGS
Section 5-3 for