History Control Configuration - Supermicro SSE-X3348T/R User Manual

History Control Configuration

Clicking the H
ISTORY
(Figure 5-34), which configures RMON history configuration parameters. The
parameters for this page are shown in
Table 5-27. History Control Configuration Page Parameters
Parameter
Index
Data Source
Buckets Requested
Interval
Owner
Buckets Granted
Status
Figure 5-34. History Control Configuration Page
tab brings up the H
Description
This parameter specifies the index to the table.
This parameter specifies the SNMP object ID of the variable for which the history
is being collected.
Indicates the number of buckets to be configured for collecting the RMON
statistics.
This parameter specifies the time interval between two successive polls to
collect the statistics.
Denotes the owner of the RMON group of statistics.
Denotes the number of buckets granted for collecting the RMON statistics.
This parameter specifies the status of the History Control entry as either Valid or
Invalid.
Chapter 5: Web Based Management Utility
C C
ISTORY ONTROL
Table 5-27.
5-47
page
ONFIGURATION