Virtual Interface - Supermicro SSE-X3348T/R User Manual

1/10 and 10-gigabit layer 2/3 ethernet switches
Hide thumbs Also See for SSE-X3348T/R:
Table of Contents

Advertisement

1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User's Manual

Virtual Interface

Figure 5-109. OSPF Virtual Interface Configuration Page
Clicking the V
IRTUAL
C
ONFIGURATION
Table
5-91.
Table 5-91. OSPF Virtual Interface Configuration Page Parameters
Parameter
Transit Area ID
Neighbor Router ID
Authentication Type
MD5 Key ID
Authentication Key
I
tab brings up the OSPF V
NTERFACE
page
(Figure
5-109). The parameters for this page are shown in
Description
This parameter specifies the transit area that the virtual link traverses.
This parameter specifies the router ID of the virtual neighbor.
This parameter allows you to choose MD5, Simple Password or None as the
authentication type.
This parameter specifies the secret key used to create the message digest
appended to the OSPF packet if the authentication type is MD5.
This parameter specifies the key required for authentication, if authentication is
enabled on this interface.
IRTUAL
5-132
I
NTERFACE

Advertisement

Table of Contents
loading

Table of Contents