Bgp Community Management - Supermicro SSE-X3348T/R User Manual

Table 5-106. Advanced BGP Configuration Page Parameters (Continued)
Parameter
Dampening Max
Suppress Time
Dampening Decay
Granularity
Dampening Reuse
Granularity
Dampening Reuse
Array Size
Confederation
Identifier
Best Path MED
Confed
Confederation Peers

BGP Community Management

Figure 5-125. BGP Community Management Page
Clicking the C
OMMUNITY
(Figure 5-125), which configures BGP community and extended community parameters.
The parameters for this page are shown in
Description
This parameter specifies the maximum time (in seconds) a route can be
suppressed.
This parameter specifies the time granularity in seconds used to perform all
decay computations.
This parameter specifies the time interval between evaluations of the reuse-lists.
Each reuse lists corresponds to an additional time increment.
This parameter specifies the size of the reuse index arrays. This size determines
the accuracy with which suppressed routes can be placed within the set of reuse
lists, when suppressed for a long time.
This parameter specifies the BGP confederation identifier. The possible values
are between 1 to 65535. Configuring 0 removes the existing configuration.
This parameter enables or disables MED comparison among paths learnt from
confed peers.
This parameter configures the ASs that belongs to the confederation.
tab brings up the BGP C
Chapter 5: Web Based Management Utility
OMMUNITY
Table 5-107.
5-151
M page
ANAGEMENT