Route Aggregations - Supermicro SSE-X3348T/R User Manual

Route Aggregations

Figure 5-123. BGP Route Aggregation Configuration Page
Clicking the R
OUTE
page (Figure 5-123), which is used to aggregate and configure the routes advertised by
BGP. The parameters for this page are shown in
Table 5-105. BGP Route Aggregation Configuration Page Parameters
Parameter
ID
IP Address Prefix
IP Address Prefix
Length
Route Advertise
Status
A tab brings up the BGP R
GGR
Description
This parameter specifies the index to this table.
This parameter specifies the IP address prefix that needs to be aggregated.
This parameter, in combination with the IP Prefix, decides the aggregated route
to be distributed by this switch.
With this parameter you can either choose to advertise only the aggregated
routes by setting Summary only, or choose to advertise all routes by setting All.
This parameter specifies the status of the entry.
Chapter 5: Web Based Management Utility
A
OUTE GGREGATION
Table 5-105.
5-149
C
ONFIGURATION