Snmp User Settings - Supermicro SSE-X3348T/R User Manual

1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User's Manual
Table 5-20. SNMP Target Parameter Settings Page Parameters (Continued)
Parameter
Security Level
Storage Type

SNMP User Settings

Clicking the U
SER
which configures users configured in the SNMP for the User-based Security Model. The
parameters for this page are shown in
Table 5-21. SNMP Security Settings Page Parameters
Parameter
User Name
Authentication
Protocol
Authentication Key
Privacy Protocol
Description
S L specifies the level of security used when generating SNMP
ECURITY EVEL
messages.
S T can be configured as Volatile or Non-Volatile.
TORAGE YPE
Figure 5-27. SNMP Security Settings Page
tab brings up the SNMP S
Description
U N is the (User-based Security) model dependent security ID.
SER AME
The A P
UTHENTICATION
The A K
UTHENTICATION
sent on behalf of this user to/from the SNMP.
P P is an indication of whether or not messages sent on behalf of
RIVACY ROTOCOL
this user to/from the SNMP are protected from disclosure, and if so, the type of
privacy protocol that is used.
S
ECURITY ETTINGS
Table 5-21.
is used for authentication.
ROTOCOL
is the secret authentication key used for messages
EY
5-40
page (Figure 5-27),