Interfaces - Supermicro SSE-X3348T/R User Manual

Interfaces

Clicking the I
NTERFACES
(Figure 5-150). The parameters for this page are shown in
Table 5-127. PIM Interface Configuration Page Parameters
Parameter
Interface
Component ID
Hello Interval
(Seconds)
Join Prune Interval
(Seconds)
CBSR Preference
Row Status
Figure 5-150. PIM Interface Configuration Page
tab brings up the PIM I
Description
This parameter specifies the interface index.
This parameter specifies a number uniquely identifying the component.
This parameter specifies the time interval between two successive Hello
messages being sent by PIM on this interface.
This parameter specifies the time interval between two successive Join/Prune
messages being sent by PIM on this interface.
This parameter indicates the preference value for the local interface as a
candidate bootstrap router.
This parameter indicates the operational status of the entry.
Chapter 5: Web Based Management Utility
C
NTERFACE
5-177
page
ONFIGURATION
Table 5-127.