Ospf Area Aggregation - Supermicro SSE-X3348T/R User Manual

OSPF Area Aggregation

Clicking the A
GGREGATION
(Figure 5-112). The parameters for this page are shown in
Table 5-94. OSPF Area Aggregation Page Parameters
Parameter
Area ID
Lsdb Type
Network
Mask
Advertise
External Tag
Figure 5-112. OSPF Area Aggregation Page
tab brings up the OSPF A
Description
This parameter specifies the area associated with the OSPF address range. It is
specified as an IP address.
This parameter specifies the link state data base type as a Summary Link or as a
NSSA External Link.
This parameter specifies the network address.
This parameter specifies the network mask.
This parameter specifies the advertise option as Advertise Matching or Do Not
Advertise Matching.
This parameter is not used by the OSPF protocol itself. It may be used to
communicate information between AS boundary routers. The precise nature of
this information is outside the scope of OSPF.
Chapter 5: Web Based Management Utility
A
REA
5-135
page
GGREGATION
Table 5-94.