Port Settings - Supermicro SSE-X3348T/R User Manual

Port Settings

Clicking the P
ORT
which configures LA properties at a per-port level. The parameters for this page are
shown in Table
Parameter
Port
Port Channel
Mode
Port Priority
Timeout
Wait Time
Port State
Aggregation State
Figure 5-75. LA Port Settings Page
S tab brings up the LA P
ETTINGS
5-58.
Table 5-58. LA Port Settings Page Parameters
Description
This parameter specifies the Interface Index.
This parameter specifies the various port modes, such as LACP, Manual or
Disable.
This parameter specifies the priority value of the Port.
This parameter sets the time within which LACP PDUs must be received on a
port to avoid timing out of the Aggregated Link. If a Long timeout is chosen then
the ports will time out of the Port Channel in 90-seconds. If a Short timeout is
chosen then the ports will time out of the Port Channel in 3-seconds.
This parameter configures the waiting time for a port after receiving Partner
information and before entering aggregation.
Chapter 5: Web Based Management Utility
S
ORT ETTINGS
5-97
page (Figure 5-75),