Vrrp Settings - Supermicro SSE-X3348T/R User Manual

1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User's Manual

VRRP Settings

Clicking the VRRP S
The parameters for this page are shown in
Parameter
Virtual Router ID
Interface
Primary IP Address
Priority
Authentication Type
Authentication Key
Advertisement
Interval (Seconds)
Preempt Mode
State
Status
Figure 5-135. VRRP Settings Page
link brings up the VRRP S
ETTINGS
Table 5-115. VRRP Settings Page Parameters
Description
This parameter indicates the Virtual ID associated with each Virtual Router.
This parameter represents the interface on which the Virtual Router must be
configured.
This parameter specifies the P
This parameter indicates the P
priority value ranges from 1 to 254.
This parameter indicates the A
This parameter indicates the A
This parameter specifies the time Interval in seconds for sending the
advertisement packets.
This parameter enablesor disables the P
This parameter indicates the current state of the Virtual Router.
This parameter specifies the Admin Status of the Virtual Router.
ETTINGS
Table 5-115.
IP A
RIMARY DDRESS
for the Virtual Router. The configurable
RIORITY
T
UTHENTICATION
K
UTHENTICATION
REEMPT
5-162
page (Figure
for the Virtual Router.
for the Virtual Router.
YPE
for the Virtual Router.
EY
M .
ODE
5-135).