Sslconfiguration - Supermicro SSE-X3348T/R User Manual

SSLConfiguration

Clicking the SSL (Secure Socket Layers) tab brings up the SSL C
(Figure 5-14), which allows you to configure SSL parameters and generate SSL
certificates for HTTPS. To configure SSL and enable HTTPS, follow the procedure
below using this page.
Configuring SSL and Enabling HTTPS
1. Configure C
IPHER
2. Create a certificate request by entering the subject name and clicking on the
CREATE button.
3. When the page reloads, the text box below the CREATE button will display a
certificate request. Copy and paste these contents to a text file that says a.csr.
4. To generate an SSL certificate, the openssl application can be used. The sub-steps
below can be executed in any Linux machine to generate SSL certificates. For other
openssl implementations, refer to the openssl documentation to find the equivalent
steps for them.
a. Execute the below command in the Linux shell.
openssl req -x509 -newkey rsa:1024 -keyout cakey.pem
-out cacert.pem
b. Execute the below command also in a Linux shell.
Chapter 5: Web Based Management Utility
Figure 5-14. SSL Configuraiton Page
S and C
UITE RYPTO
5-23
K RSA with your chosen parameters.
EY
page
ONFIGURATION