1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User's Manual
RIP
The RIP link opens the following links for configuration of RIP protocol:
•
RIP Basic Settings
•
Interfaces
•
Neighbors List
•
Security Settings
•
Address Summarization
RIP Basic Settings
Clicking the B
ASIC
The parameters for this page are shown in
Parameter
Output-delay
Neighbor Filter
Auto-summary status This parameter enables or disables the Auto-summary feature.
Figure 5-99. RIP Basic Settings Page
S
tab brings up the RIP B
ETTINGS
Table 5-82. RIP Basic Settings Page Parameters
Description
This parameter specifies the delay that needs to be enabled for RIP to split the
periodic update packets before they are sent out.
This parameter enables or disables neighbor filtering. Neighbor filtering helps
you to filter routes from specific neighbors.
S
ASIC
Table
5-82.
5-122
page
(Figure
ETTINGS
5-99).