Local Preference
Figure 5-121. BGP Local Preference Configuration Page
Clicking the L
OCAL
page
(Figure
5-121), which allows you to configure the Local Preference value for
routes. The parameters for this page are shown in
Table 5-103. BGP Local Preference Configuration Page Parameters
Parameter
Local Preference ID
Remote AS
IP Address Prefix
IP Address Prefix
Length
Intermediate AS
Direction
Value
Preference
Status
P
tab brings up the BGP L
REF
Description
This parameter specifies the Local Preference ID, which is the index for this
table.
This parameter specifies the AS number from which the route update is
received.
This parameter specifies the IP Address prefix for which the update is received.
This parameter is used to calculate the subnet.
This parameter represents the intermediate AS between the BGP peers.
This parameter can be set for the incoming or the outgoing packets using In and
Out values.
This parameter specifies the Local preference value to be associated with this
learnt path.
This parameter is used to enable/disable filtering.
This parameter specifies the status of the entry.
Chapter 5: Web Based Management Utility
P
OCAL
REFERENCE
Table
5-103.
5-147
C
ONFIGURATION