Rip - Supermicro SSE-X3348T/R User Manual

RIP

Clicking the RIP tab brings up the RRD RIP C
allows you to re-distribute the routes that are learnt through other routing protocols to
RIP. The parameters for this page are shown in
Table 5-110. RRD RIP Configuration Page Parameters
Parameter
RIP Status
Default Metric
Import
Route Tag Type
Route Tag
Figure 5-128. RRD RIP Configuration Page
Description
This parameter enables or disables redistribution for RIP.
This parameter specifies the metric for the routes that are being re-distributed.
You can use this parameter to choose to import Direct routes, Static routes,
OSPF routes and BGP routes to RIP.
This parameter describes whether a tag is manually configured or automatically
generated.
This parameter indicates the route tag in case you configure a manual option for
the tag type.
Chapter 5: Web Based Management Utility
ONFIGURATION
Table 5-110.
5-155
page (Figure 5-128), which