Port Settings - Supermicro SSE-X3348T/R User Manual

Port Settings

Clicking the P
ORT
(Figure 5-77), which configures security information at the individual port levels. The
parameters for this page are shown in
Table 5-60. 802.1x Port Settings Page Parameters
Parameter
Port
Port Control
Port Authorization
Status
Authentication Mode
Admin Control
Direction
Operational Control
Direction
Figure 5-77. 802.1x Port Settings Page
S tab brings up the 802.1
ETTINGS
Description
This parameter specifies the Index of the port for which its fields (such as P
C , P A
ONTROL ORT UTHORIZATION
This parameter specifies the control values of the Authenticator Port. The control
values can be:
• Force Authorize - All the traffic through this port will be allowed always.
• Force Unauthorize - All the traffic through this port will be blocked always.
• Auto - The 802.1x authentication process will be imposed over this port.
This parameter specifies current status of the port either as Authorized or
Un-Authorized.
This parameter specifies the configuration for selecting the A
M to be Port Based.
ODE
This parameter specifies whether security is to be imposed for
• In - the incoming traffic
• Both - both incoming and outgoing traffic
This parameter specifies the current security status.
Chapter 5: Web Based Management Utility
P
X ORT
Table 5-60.
S , and so on) are configured.
TATUS
5-99
S page
ETTINGS
UTHENTICATION
ORT