Tacacs+ Global Settings - Supermicro SSE-X3348T/R User Manual

Table 5-4. RADIUS Server Configuration Page Parameters
Parameter
Response Time
(secs)
Retry Count

TACACS+ Global Settings

The TACACS+ G
retries and choose an active TACACS server. The parameters for this page are shown in
Table 5-5.
Table 5-5. TACACS+ Global Settings Page Parameters
Parameter
Active Server IP
Address
Retries
Description
This parameter specifies the maximum time within which the Radius Server has
to respond for a request from the Radius Client. The valid range is 0 to 120
seconds. The factory default is blank.
This parameter specifies the maximum number of times a radius request is to be
re-transmitted before getting a response from the Radius Server. The valid range
is 1 to 254. The factory default is blank.
Figure 5-10. TACACS+ Global Settings Page
S page
LOBAL ETTINGS
Description
Specifies the IP address of the active TACACS server. This server should have
been already configured in the following TACACS+ S
page (Figure 5-11). The factory default is 0.0.0.0.
This parameter determines the number of times the switch searches the active
TACACS server from the list of servers maintained. The allowed values are from
1 to 100. The factory default is 2.
Chapter 5: Web Based Management Utility
(Figure 5-10) allows you to configure TACACS
5-19
C
ERVER ONFIGURATION